Product Summary

The PIC18F67J10-I/PT is a 64-Pin, High-Performance, 1-Mbit Flash Microcontroller with nanoWatt Technology.

Parametrics

PIC18F67J10-I/PT absolute maximum ratings: (1)Ambient temperature under bias: -40 to +125℃; (2)Storage temperature: -65 to +150℃; (3)Voltage on any digital-only I/O pin or MCLR with respect to VSS (except VDD): -0.3V to 6.0V; (4)Voltage on any combined digital and analog pin with respect to VSS (except VDD): -0.3V to (VDD + 0.3V); (5)Voltage on VDDCORE with respect to VSS: -0.3V to 2.75V; (6)Voltage on VDD with respect to VSS: -0.3V to 3.6V; (7)Total power dissipation: 1.0W; (8)Maximum current out of VSS pin: 300 mA; (9)Maximum current into VDD pin: 250 mA; (10)Maximum output current sunk by any PORTB and PORTC I/O pin: 25 mA; (11)Maximum output current sunk by any PORTD, PORTE and PORTJ I/O pin: 8 mA; (12)Maximum output current sunk by any PORTA, PORTF, PORTG and PORTH I/O pin: 4 mA; (13)Maximum output current sourced by any PORTB and PORTC I/O pin: 25 mA; (14)Maximum output current sourced by any PORTD, PORTE and PORTJ I/O pin: 8 mA; (15)Maximum output current sourced by any PORTA, PORTF, PORTG and PORTH I/O pin: 4 mA; (16)Maximum current sunk by all ports: 200mA; (17)Maximum current sourced by all ports: 200 mA.

Features

PIC18F67J10-I/PT features: (1)Operating voltage range: 2.0V to 3.6V; (2)5.5V tolerant input (digital pins only); (3)On-chip 2.5V regulator; (4)Low-power, high-speed CMOS Flash technology; (5)C compiler optimized architecture: Optional extended instruction set designed to optimize re-entrant code; (6)Priority levels for interrupts; (7)8 x 8 Single-Cycle Hardware Multiplier; (8)Extended Watchdog Timer (WDT): Programmable period from 4 ms to 131s; (9)Single-Supply In-Circuit Serial Programming (ICSP) via two pins; (10)In-Circuit Debug (ICD) with three Break points via two pins; (11)High-current sink/source 25 mA/25 mA (PORTB and PORTC); (12)Four programmable external interrupts; (13)Four input change interrupts; (14)Two Capture/Compare/PWM (CCP) modules; (15)Two Crystal modes, up to 40 MHz for VDD > 2.15V; (16)4x Phase Lock Loop (PLL); (17)Two External Clock modes, up to 40 MHz; (18)Internal 31 kHz oscillator; (19)Secondary oscillator using Timer1 @ 32 kHz; (20)Two-Speed Oscillator Start-up; (21)Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock stops.

Diagrams

PIC18F67J10-I/PT block diagram

Image Part No Mfg Description Data Sheet Download Pricing
(USD)
Quantity
PIC18F67J10-I/PT
PIC18F67J10-I/PT

Microchip Technology

8-bit Microcontrollers (MCU) 128 KB FL 4 KB RAM

Data Sheet

0-1: $2.39
1-10: $1.91
10-25: $1.75
25-100: $1.58
PIC18F67J10-I/PTREL
PIC18F67J10-I/PTREL

Other


Data Sheet

Negotiable